Multilevel Cooking Grate

• Model M-32 accessible campfire ring features a flat rear panel so wheelchairs can have closer access to the cooking grate and adjustment handles. The 300 sq. inch cooking grate adjusts to 4 levels between 19" and 24" above the ground. This firering design allows the grate to be adjusted one side at a time, using only one hand; without tight grasping, pinching or twisting of the wrist; and does not exceed 10 lbf. to lift.

• The firering is rolled using 3/16" thick steel, with 1" formed flange for strength and safety. The adjustment panels are cut from 3/16" steel, and also serve as heat shields. The cooking grate is welded together using 5/8" dia. handle/support bars and 1/2" dia. grate bars, and includes handle grips of 1/8" x 1/2" coiled steel. The finish is high temp non-toxic black enamel paint. Pin anchors provide a fixed location (See Anchor Systems).

• The ring is filled with aggregate (not included) to about 10-1/2" deep to provide the elevated fire surface. This fill also insulates the ground to reduce the chance of root fires in heavily wooded areas. Drain/draft holes are provided around the perimeter of the firering.

• Optional: bolt on utility shelf Model S5 (See Utility Shelf below).

• Optional: heat shield Model HS-F (See Heat Shield below ).

Single Level Cooking Grate

• Model FS-30/18/PA accessible campfire ring includes the simple single level cooking grate. The 290 sq. inch grate can be laid over the fire, or tipped over and out of the firering, but it remains permanently hinged to the ring. This taller firering, available in 18" or 24" tall designs, brings the cooking surface to a convenient height for use from a wheelchair.

• The firering is rolled using 3/16" thick steel, with 1" formed flange for strength and safety. The welded cooking grate uses a 3/4" dia. handle bar, 5/8" dia. perimeter bar and 1/2" dia. grate bars, and includes handle grips of 1/8" x 1/2" coiled steel. Finished with high temp non-toxic black enamel paint. Pin anchors provide a fixed location (See Anchor Systems).

• The ring is filled with aggregate (not included) to about 9" above the ground to provide the elevated fire surface. This fill also insulates the ground to reduce the chance of root fires in heavily wooded areas. Drain/draft holes are provided around the perimeter of the campfire ring.

• Optional: bolt on utility shelf Model S5 (See Utility Shelf below ).

• Optional: heat shield Model HS-M (See Heat Shield below).

These designs have been developed in conjunction with parties interested in providing accessibility in their facilities, and with design guidelines set forth by PLAE, Inc., and the USDA Forest Service in the book “Outdoor Recreation Guidelines” (FSORAG). We have also consulted the guidelines issued by ADAAG. Due to the changing nature of the ADA guidelines, we make no claim that these designs conform in every respect to current/revised ADA criteria. The purchaser must determine suitability for use in a particular facility.

With constant fluctuations in the cost of materials, the price of some products changes frequently. To get our most recent and lowest price please Email us

Prices start at about $240.00 (Quantity discounts available)

Fire Ring Options

See Firering Anchor Systems - Heat Shields - Utility Shelves